img
img
img

HPE Cisco B22HP

96 995 kr 3 109 kr/mnd (Ved leie i 36 måneder)
  • Lagerstatus: Bestillingsvare
  • Frakt fra: 99 kr
Legg merke til at dette produktet er en bestillingsvare og kan derfor ikke returneres. Produktet kan derfor heller ikke annulleres eller returneres når du har bekreftet bestillingen din. Du kan lese mer i våre kjøpsbetingelser under avsnitt 7.
  • Artikkelnr.
  • 5010895012
  • Prod. art. nr.
  • 641146-B21

Raske fakta

Produsent
HP

Nøkkelfunksjoner

  • Each Ethernet downlink supports Fiber Channel over Ethernet (FCoE), Datacenter Bridging (DCB), and iSCSI
  • Each Ethernet downlink can auto-negotiate to 1Gb to support legacy NICs and/or Wake On LAN eight 10 Gb uplinks
  • Each Fabric uplink carries both Ethernet and Fiber Channel over Ethernet (FCoE) traffic
  • Up to 24 Fabric Extenders can be managed by a single Nexus 5000 series switch
  • Ports support Ethernet, iSCSI and DCB protocols
  • Centralized management - all configuration and monitoring performed on parent Nexus switch
  • Up to 24 Fabric Extenders can be managed by a single Nexus 5000 series switch

 

  • Support for SNMP V1, V2, V3
  • XML (Netconf) support

Produktinformasjon

The Cisco B22HP Fabric Extender for HP BladeSystem provides an extension of the Cisco Nexus switch fabric to the HP server edge. Logically, it behaves like a remote line card to a parent Cisco Nexus 5000 series switch with the Fabric Extender and the parent Nexus together forming a distributed modular system. The Cisco Fabric Extender for HP BladeSystem forwards traffic to the parent Cisco Nexus 5000 series Switch over eight 10 Gigabit Ethernet uplinks.Low-cost uplink connections up to 10 meters can be made with copper twin-ax cable, and longer connections up to 100 meters can use the Fabric Extender Transceiver. Standard 10 Gb optics such as SR and LR are also supported.Downlinks to each server are auto-negotiating and work with all HP Ethernet and CNA modules allowing customers a choice of Ethernet, FCoE or iSCSI connections. Being a seamless extension of a Nexus 5000 allows traffic to be switched according to policies established by the Nexus 5000 series switch with a single point of management.

Spesifikasjoner

Topptekst
Produsent HP
Generelt
Nettverk / Type Utvidelsesmodul
General
Device Type Expansion module - 16 ports
Form Factor Plug-in module
Expansion / Connectivity
Interfaces 16 x 10Gb Ethernet / FCoE - backplane
Compliant Standards
Compliant Standards CISPR 22 Class A, VCCI Class A ITE, EN55022 Class A, CB, UL 60950-1, IEC 60950-1, WEEE, FCC Part 15 A, CSA C22.2 No. 60950-1, AS/NZS 3548 Class A, BSMI Class A, KCC Class A
Nettverk og kommunikasjon
Tilkoblingsteknologi Kablet
Datakjedeprotokoll GigE, 10 GigE, FCoE, Gigabit Ethernet, Fibre Channel over Ethernet (FCoE), 10 Gigabit Ethernet
Nettverkstilknytning / Protokoll for fjernstyrt administrasjon SNMP 1, SNMP 2, RMON, SNMP 3, CLI, SNMP 1, SNMP 2, RMON, CLI, SNMP 3
Dataoverføringshastighet 10000 Mbps
Kompatibel standard IEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ae, IEEE 802.3ap
Network & Communication
Data Link Protocol Gigabit Ethernet, Fibre Channel over Ethernet (FCoE), 10 Gigabit Ethernet
Networking / Features Flow control, auto-negotiation, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support
Størrelser og vekt
Yttermål Bredde 26.8 cm
Yttermål dybde 9.3 cm
Yttermål Høyde 2.8 cm
Vekt 1.27 kg